Phase Sensitive Detector Amplifier - 2 channel (PSDA-2)

Main Amplifier: AC coupled input
Input AC power 110/220 50/60 Hz
Bandwidth: 10 KHz
Gain: 50 or 500
Features:
  • Dual sine/cosine oscillators
  • Frequency range: 100 to 1KHz
  • Dual phase sensitive detector amplifiers
  • Output Range: +/- 10 VDC
  • Current source for calibration and electrode plating
  • Circuits for test and calibration
  • Preamplifier (model 100)
  • 2D piezoelectric vibrator assembly - 2D ITL
Model 100  Preamplifer:      Differential Input
     Input resistance: 1012 ohms
     Bandwidth: 100 Khz
     Gain: x10 or x100 (Switch selected)
 User-modifiable electronics
Full one year warranty parts/labor
Free email help line

 

IPA-2  Ion / Polarographic Amplifier 

 

Main Amplifier Features: Input Power: 100-240 VAC 50/60 Hz
Amplifier Gain: x10/x100 standard
Bandwidth: 10 Hz standard
Two channels
Front panel display of Nernst potential or electrode current
Two channels for simultaneous dual measurements
Internal polarization voltage range +/- 3.0 VDC
External polarization input (drive with D/A or signal generator)

Ion-Selective Headstage:

Input resistance: 10 TΩ minimum 
Gain: x10
Polarographic Headstage: Gain:  1  mV/pA
Ion Electrode Kit:  2 Teflon electrode holders, dri-ref. electrode
User-modifiable electronics
Full one year warranty parts/labor
Free email help line

Need More Information?  Have a question?
If you have any questions about Amplifiers, click on the Request Form link  or send e-mail to Alan Shipley

| Top of Page |
| Home | Profile | Systems |
|Techniques | Equipment | Support |